Fog Computing's Emergence
Trend

Fog Computing's Emergence

Now that cloud computing is popular, the application of Internet of Things is also increasing day by day. However, in terms of architecture, in order to overcome the lack of computing power of connected devices, people have also begun to develop so-called fog computing, which is different from cloud services. And, what is it?
Published: Jun 07, 2023
Fog Computing's Emergence

Following "Cloud Computing", a new term "Fog Computing" has been added in recent years, which mainly comes from the phrase "fog is a cloud that is closer to the ground". The "cloud computing" has been hotly discussed a few years ago and it is now like sunlight, air, and water, existing in our lives. So, what is the difference between "fog computing" and "cloud computing"? Why do we need "fog computing" when we have "cloud computing"?

Fog Computing Is Derived From Cloud Computing

The term fog computing was first proposed by Cisco. In the sentence "fog is a cloud that is closer to the ground", the "cloud" is high in the sky, which symbolizes the computing resources that are located in the center of the network, and represents the centralization of computing resources. "Ground" represents the end of the network where the user is located. Therefore, closer to the ground means closer to the end of the network where the user is located. "Fog" represents that it is closer to the user than "cloud". Computing resources at the end of the network.

Why do we need to deploy computing resources closer to the end of the network?

There is a very important reason for the development of Internet of Things technology and applications. There are more and more smart Internet-connected devices connected to the Internet. Under the basic model of cloud computing, most of them only have very weak computing capabilities. Therefore, relevant computing resources must be obtained from the cloud through the Internet, such as storage or computing power. With the rapid growth of demand, firstly, the burden on the cloud is getting heavier and heavier, after all, it is a centralized resource; secondly, the distance from the cloud to the terminal is relatively far, and when these smart devices access the resources on the cloud, they will have a longer delay time.

Therefore, under these considerations, there is fog computing, which is to decentralize computing resources to a certain extent and deploy them closer to users.

Therefore, fog computing is not a replacement for cloud computing, but an extension of cloud computing.

Basically, the combination of the two is to stratify the allocation of computing resources. The top layer is the cloud, the middle layer is the fog, and the bottom layer is the networked device at the user end. Therefore, under this model, a certain proportion of the computing resources that were originally concentrated in the cloud will be reduced to the fog end. When the device needs to access resources, it will be taken from the nearest fog end.

In this way, because the fog end is closer to the ground, the access speed is faster. Second, even if frequent and large amounts of communication are required, a large amount of network traffic will only be distributed between the ground and the fog, and will not be communicated thru the cloud to reduce the burden on the cloud.

Changing The Mode That Was Originally Too Centralized to The Cloud for Processing

Based on this design architecture, we can actually get some benefits.

Due to the cost of bandwidth on the cloud, regardless of the actual purchase price or the cost of centralization, it is actually much higher than that of the fog end. In addition to the regionalization of traffic, calculation is also decentralized, so this can greatly reduce the burden on the cloud.

Fog-end computing attempts to re-allocate computing resources, reduce the height of computing resources originally deployed in the cloud to the fog, and achieve a certain degree of hierarchy and decentralization by transforming the original relatively centralized computing model, thus gaining these benefits.

Contain Centralized and Decentralized Features

自从人类发明了电脑,计算国防部el has been oscillating between centralization and decentralization. However, centralization and decentralization are actually only the difference in degree. From the earliest mainframe computers to personal computers, from highly centralized computing to distributed computing. Taking cloud computing as an example, it is centralized in concept, but it is distributed computing on top of the cloud itself, which is filled with a huge number of servers, and constitutes a huge computing resource for access.

曾几何时,对等计算模型was also popular, and people tried to distribute all computing power to a larger number of computing devices. After that, the trend turned back to cloud computing.

Although cloud computing is centralized, it is no longer highly centralized. It is centralized with decentralization.

Therefore, we can also say that fog computing is decentralized and centralized. On top of a large number of decentralized smart IoT devices, more centralized fog devices are deployed. However, compared with the cloud, the fog end is much more scattered.

From the perspective of the abundance of computing resources, the cloud is the most concentrated, so the computing resources are the most abundant, whether it is computing power, storage space or bandwidth. Relatively speaking, the fog end is relatively weak, but because the number is much larger than the servers deployed in the cloud, the combination can also provide considerable computing resources, and it is more convenient to use the location close to the user. These are the benefits that can be obtained after introducing the concept of fog computing.

With the development of technology, even terminal computing devices now possess far more computing resources than in the past. A small smart phone has far more computing power than a personal computer in the past. At the same time, the pendulum of concentration and dispersion is still oscillating, but it is getting closer and closer to the middle, just like the concentration in the clouds has dispersion, and the fog has concentration in the dispersion.

随着计算设备越来越多样化,设备with different levels of resources are deployed at different locations on the network, and people will make the application system achieve better performance by properly allocating the roles of different devices.

Recently, the technology of Blockchain has attracted a lot of attention, and it is dedicated to achieve complete decentralization. In the historical development of computing models, there is a trend toward decentralization. But the real world in the future must also constantly mix and match various centralized and decentralized elements, and determine the composition and degree of decentralization and concentration according to needs.

In the next few years, the model of cloud computing combined with fog computing is likely to become popular, and it will bring a high degree of influence and substantial changes. Using fog to match clouds, in the future we will not only cloudy, but also fogy.

Published by Jun 07, 2023 Source :iThome

Further reading

You might also be interested in ...

Headline
Trend
Advancing Towards Smart Manufacturing: The Present Status and Future Prospects of Robotic Arm Integrated Vision
The world has entered the era of Industry 4.0. robots assist human manufacturing, emphasizing the use of "human-machine collaboration" to move toward smart production. In recent years, the population aging problem faced by developed countries has caused the production costs of industry and manufacturing to increase year by year. Enterprises have deployed automation equipment to improve production efficiency. Various industries have also undergone tremendous changes in this intelligent wave.
Headline
Trend
Implementing Green Manufacturing in the Mechanical Manufacturing Industry
Green Manufacturing, also known as environmentally conscious manufacturing, is a manufacturing model that considers environmental impact and benefits.
Headline
Trend
Smart Factories Unveil Four Key Trends in the Manufacturing Industry
"Efficiency" is the most important key in the pursuit of success in the manufacturing process and the entire industry.
Headline
Trend
The Shift in Textile Industry: Embracing Intelligent Manufacturing and Advancing towards a Circular Economy
With the global economic development, the demand of the consumer market has driven the vigorous growth of the textile industry. However, under the business model of production-based sales, excessive production has not only caused environmental pollution but has also caused unnecessary waste of resources. Over the past few years, this has led the United Nations and the European Union, to begin to advocate "sustainability" and "environmental protection" as the focus of global development for the next 10 years.
Headline
Trend
As the 5G Era Approaches, What Is About 6G?
6 g技术后5 g已经被研究d by existing countries. Relative to the revolutionary change of 5G, 6G should be the perfection, strengthening, and further optimization and promotion of 5G technology.
Headline
Trend
Trust Machine: Blockchain Expansion and Industrial Applications Pave the Way for a New Era
In the field of manufacturing and supply chain, the technical assistance of Industry 4.0 and 5G and AI, combined with blockchain, can promote the new development of manufacturing and achieve more effective integration of hardware, software and services.
Headline
Trend
Overcoming Key Challenges in the Internet of Things
Today, the Internet of Things is still a hot topic in many industries. Emphasizing the benefits of adopting this technology, Fortune Business Insights estimates that by 2026, the global Internet of Things market will reach 1102.6 billion US dollars.
Headline
Trend
Can 3D Printing be Utilized in the Die and Mold Industry?
As adoption of 3D printing spreads throughout the larger sector of industrial manufacturing, the value of the technology as more than just a rapid prototyping tool is becoming increasingly evident. In this article, we gave an overview of how 3D printing is used to fabricate molds and dies for injection molding and die casting.
Headline
Trend
Motion Control Plays A Key Role in Industrial Automation Developments
In the trend of industrial automation, motion control is a key part of it. Automating operations through machines can avoid a lot of human error, and can also speed up production efficiency and efficiency. How to make the machine act according to the command is the application category of machine motion control.
Headline
Trend
Global Market of Electric Bicycle
Global environmental awareness is rising, and bicycles have gradually changed from sports and leisure functions to commuting means. Among them, electric bicycles have been fueled by an aging population, which has led to a substantial increase in the global output of electric bicycles in recent years.
Headline
Trend
Integration of IT and OT Technologies Accelerates the Development of Smart Manufacturing
The US-China trade war has triggered a major reshuffle of the supply chain. The global manufacturing industry is facing unprecedented challenges. In the process of transforming smart manufacturing, the biggest problem is the integration of operating technology (OT) and information technology (IT). Only by working with the smart manufacturing ecosystem can we have a chance to survive in the changes and seize future business opportunities.
Headline
Trend
Intelligent Plastic and Rubber Machinery
With the rise of global environmental protection awareness, the improvement of process efficiency and pollution reduction of plastic products have become important issues for the rubber and plastic industry. In response to the shortage of workers and the reduction of personnel contact, mechanical automation and cloud services have become the new normal in the industry.
Agree